Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Flashing white screen after battery replacement

Replaced battery in iPhone 6. Plugged it in to power with original Apple cable/charger, and all I get is the white screen with black apple logo. Comes on for a few seconds, goes black, comes on again. Over and over again. Have tried holding power/home button, plugging in to computer (iTunes does not recognize), and reseating battery. Do I need another new battery?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

iPhone is not properly recognising the battery.

Reseat / Replug the battery cable and try turning it on again.

If it still does the apple boot loop then you have a bad replacement battery.

Bu yanıt yardımcı oldu mu?

Puan 4

4 Yorum:

Thanks, Ben! I didn't have the battery seated quite right, so reseating it worked.

tarafından

Kthyne, Please remember to select the solution that worked for you so other members will know what worked :)

tarafından

Hi Michael, I selected "Yes" yesterday about two hours before your comment and thanked Ben for his advice. Is there something more I need to do to "select" his solution? This is my first post here, so I'm still finding my way. I certainly do want other members to know what worked.

tarafından

it isnt a seating problem for me because it turned on after the installment

tarafından

Yorum Ekle

Connect to computer, if the iTunes doesn't recognize,press and hold the power button and Home button at the same time until you see the Apple Logo.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

kthyne sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 19

Her zaman: 2,418