Ana içeriğe geç

Microsoft's third-generation Xbox game console, released November 22, 2013.

727 Soru Tümünü görüntüle

Controller sync button not responding.

I cannot get my controller to sync to the Xbox. When i press the side button on the Xbox it will not enter sync mode. if i plug the controller in with a USB cable it will work like normal, but the second I unplug the cable it disconnects. I have already tried a factory reset of the system and tech support wants to charge me to replace the system. any advise?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

If your wifi is still working, and assuming the controller's transmissions are working fine, it sounds like it might be the RF module. Xbox One RF Module Board

or..

Xbox One Wi-Fi Board

and..

Xbox One Wi-Fi Cable

Xbox One RF Module Board Görseli

Ürün

Xbox One RF Module Board

$5.99

Xbox One Wi-Fi Board Görseli

Ürün

Xbox One Wi-Fi Board

$29.99

Xbox One Wi-Fi Cable Görseli

Ürün

Xbox One Wi-Fi Cable

$4.99

Bu yanıt yardımcı oldu mu?

Puan 1

8 Yorum:

It connects to Wifi just fine. When I press the button to sync I can hear it click, but the console light wont flash.

tarafından

If you have another controller to test you might try it first, otherwise I suspect the RF module. Hope this helps :)

tarafından

I have tried a controller from another console with no luck. Any idea how to change the RF Module? I couldn't find anything online

tarafından

There is a guide right underneath the part that I listed for the RF Module :) ifixit is the best.

tarafından

You should also double check your settings to make sure the problem doesn't lie there.

tarafından

3 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Chad Edwards sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 19,306