Ana içeriğe geç

Repair guides and support for motherboards and CPUs.

165 Soru Tümünü görüntüle

Asrock P67 pro3 has a broken component

Hi Folks,

My friend has came across with his broken PC where I've found a burned out component on the Motherboard Asrock P67 pro3 , but wasn't able to read a top layer with model on it. Can someone give an advice which micro-component should I get for a replacement? Thank you :)

Block Image

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi Tarlan Isaev,

If your computer is running slower than usual, randomly freezes or restarts, or refuses to boot, see the Motherboard Has a Faulty Capacitor problem page for capacitor troubleshooting help.

Block Image

are you referring to this? based on the circuit F5, it is a fuse

normally fuse blow can be due to surge or faulty ICs / transistor that draws alot of power and yea....

else the arrow you pointed could be a smd capacitor,

you need to get schematics to know the actual value of the components.

Bu yanıt yardımcı oldu mu?

Puan 2

2 Yorum:

Hi Augustine,

Thank you for getting back :)

I'll have a look to the schematic of it, hopefully it's not so hard to find out :)

tarafından

Hi Augustine,

Eventually I ordered a wrong fuse. So I decided to solder a tiny wire between two pins and finaly the motherboared has became alive :)

Again thank you very much :)

tarafından

Yorum Ekle

Yanıtını ekle

Tarlan Isaev sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 497