Skip to main content

Model A1418 / Mid 2014 / 1.4, 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

36 Soru Tümünü görüntüle

iMac No Diagnostic leds lite

Hey Have an imac i picked up on ebay for a fix up like i did with the imac im typing on right now i digress anyway when i plug the power cord into a good AC source the NO.

1 led blinks then turns off. When i push the power button nothing happens no fan spin.

Things ive checked

power button has continuity when pressed: Good

AC jack where the power cord plugs in then connects to psu has continuity:


Here is my diagnosis:


What do you Guys think ive ordered a good working psu if this does not fix it i have a schematic and boardview ready to go i know how to read schematics as i have fixed tube radios in the past So i know what im doing....

If no one replys and the psu does the trick like i think it will i will report back as to help future servicemen/women

Answered! View the answer I have this problem too

Is this a good question?

Puan 0
Add a comment

Android Tamir Setleri

Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

Hemen Alışveriş Yapın

Android Tamir Setleri

Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

Hemen Alışveriş Yapın

2 Cevap

Chosen Solution


got the mac working

Got the psu in with no change

so i pulled up the schematic and probed the output of the psu

12v still no led no 1

so i found the led on the schematic and it said 3.3v on positive side of led (3.3 is the trickle voltage from second smaller connector on psu) probed led no 3.3v

(i noticed that the led would flicker sometimes so i thought loose connection at a solder joint)

when i applied pressure to led it would flicker more often)

so i reflowed the led area and the MAC TURNED ON

i remeasured the led and got 1.2 v when its supposed to be 3.3v checked a cap right next to it and got 3.3v on one side and 1.2 on the side going to the led

so i think the heat reformed the cap and fixed a bad solder joint


Was this answer helpful?

Puan 0
Add a comment
Most Helpful Answer

That's the correct first step, the PSU. Logic boards seldom fail.

Was this answer helpful?

Puan 1


ill let you know when i gets here thanks


Looking Like The PSU is the correct answer to this problem ill let everyone know when it arrives


Add a comment

Add your answer

Jack Graham will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 10

All Time: 498