Ana içeriğe geç

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Soru Tümünü görüntüle

Doing a LCD and glass replacement on iPad 2

I was doing a iPad 2 LCD and glass replacement when the glass was sticking super strong...in the process of removing the glass it tore something near the home button I will attach a pic. It just tore where the bolts had it screwed down. Is this still good or will it need replaced? Can I just put some adhesive behind it and stick it back down?

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

That Wi-Fi antenna physically looks good from the photo but you should also check a bit more of the cable under the LCD, if it looks okay, it's okay but you can check when you test install the new digitizer the Wi-Fi reception if it's weak or not.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Frost tech repairs sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 64