Ana içeriğe geç

Released 2015 Model Number: POLSP01W

61 Soru Tümünü görüntüle

My camera prints but it comes out blank

I got a Polaroid snap yesterday and only used it today, I can take a photo and print it out but the paper comes out blank. It says it doesn’t need ink and people just talk about getting the right film but the film came with it so I’m a bit confused.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 6
Yorum Ekle

6 Cevap

Filtre ölçütü:
En Yararlı Yanıt

I had the same problem. In my case I placed the Zink paper with the blank side facing down thinking that was the logical way. Turns out you need to face the blank side of the Zink paper upwards

Bu yanıt yardımcı oldu mu?

Puan 5

Yorumlar:

Thank you Akaash!! I came here looking for your answer!!

tarafından

Thank you. the answer I was looking for!

tarafından

Yorum Ekle

I had this problem and looked at multiple sites. When none of their sugesttions worked, I tried my own solution. I opened up a new package (10 film cards) and at the very top or bottom, Idr, is a blue card with a barcode. When your loading the film into your camera, lay down the blue bar code FIRST and make sure the actual barcode is touching the inside of the camera. Blank side up. Then load the rest of your film. When you turn the camer back on, it will scan the barcode. I tried printing and my camera turned off. Then I tried printing a second time and the picture came out with color. Hazahhhh. I think the camer turning off just happens to mine occasionally.Hope this works for you too

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle

I have to ask the obvious question, but did you take the lens cap off?

Also take it back to the store, if it is the camera. Have them swap it out and test it there and then for you.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I have to ask you a question, how can you ask this question?? If the lens cap is on, how do you think is going to print a black picture?

tarafından

If the lens cap is on, and a picture is taken. Then light will not enter the camera and therefore the picture will when it prints, be black.

tarafından

Yorum Ekle

I have the same problem. Any help or did you ever fix it?

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I ditched the camera in the bin (after asking for help to Polaroid and local camera shop, because the price for repair was the same as the price of a new Polaroid camera).

tarafından

Yorum Ekle

Did you take out the film after putting it in? I did that and now the film doesn't work. It's not the camera, it's the film. I suggest buying new film and see if that will work.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

You need to wait 15+ mins for the photo to develop.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Sophiejack21 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 gün: 41

Son 30 gün: 166

Her zaman: 34,267