Eşyalarını Tamir Et Topluluk Mağaza
Onarım Topluluğuna Katılın - Hesap Oluşturun

20 Soru Tümünü görüntüle | 71 Parçalar Mağaza

Seçenekler

iPhone screen not working

I replaced iPhone 6 screen a few days ago , as I have done it many times before , there was no problem until the battery had to be replaced today , as I put the screen back on I notice it has lines going up and down the phone and looks as though it had been dropped even though I didn’t drop it and I was very careful taking the screen off and putting it back on , any reasons why ? Is it the screen or the motorboard itself , thank you

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Either it's the flex cable on the screen gone bad or not connected properly to the logic board.

If the screen connectors on the logic board seem fine and you already tried replugging the screen then the screen is faulty.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

3 Yorum:

Thank you so much

tarafından

One of the connectors don’t click like the rest , does this matter?

tarafından

The two horizontal ones from the screen should click in normally.

There is another cable that clicks in furthest away from the rear camera and that is for the front camera you don't need to worry about that one.

The one cable that is horizontal and smallest is for the LCD screen display.

tarafından

Yorum Ekle

Yanıtını ekle

Mary sue sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 79