Ana içeriğe geç

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Soru Tümünü görüntüle

Purchased new back for iPhone 6s Plus and power button will not fit...

Hello,

I purchased a new back (Gold) from Amazon for my iPhone 6s Plus and for some reason the power button will not fit. I have tried two different buttons to rule that out. When I place the power button into the new back case it sits flush at best. I know for a fact that it is supposed to protrude and "click" when pressed or held.

My guess is that the hole on the back case is too small for some reason. I thought about taking a drill and expanding the hole a bit.

Any suggestions?

Thank you in advance.

Jason

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Just return it back to Amazon on reason of defect.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

That's exactly what I'm going to do because it's driving me nuts!! Thanks to all!

tarafından

Yorum Ekle

This is weird but the new buttons don't come with the "click" thingy for some reason, transfer your old power button from your old back housing unit and you should be good, sucks I know but oh well

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Hi, unfortunately I've tried that already with no success. Both buttons are so tight that neither one can be pressed when in the hole. I verified that the click does happen on the cable, but when inserted, the button does not engage it because it doesn't move. Like I said, it's almost like the hole is too small. I am going to try again in the morning. Thanks!

tarafından

Yorum Ekle

Then the back frame was designed incorrectly :/

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Jason Kinney sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 57