Eşyalarını Tamir Et Topluluk Mağaza

25 Eylül 2015'te yayımlandı. A1688/1633 modeli. Bu cihazın tamiri eski nesillerinkine benzer; tornavida ve kaldırma aletleri gerektirir. GSM ya da CMDA olarak / 16, 32, 64 yada 128 GB kapasiteli / Gümüş, Altın, Uzay Grisi yada Rose Gold (Gül Altın) seçenekleri mevcuttur.

2693 Soru Tümünü görüntüle

Seçenekler

Is there a way to test the ambient light sensor?

I have recently had to replace my FCAM/Sensor assembly (my ear piece audio went out) and was able to use an app to test the proximity sensor but there is no such ability with the ambient light sensor. I move from a well light room to a dark room and don't notice any difference but I never really payed any attention in the past so can't really tell if this would be noticeable. Is there any way to test this? or even create a situation when where the shift in brightness should be clearly apparent?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

4 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Go to general-accessibility-display-accommodations. Look for Auto brightness toggle. Switch it off and on. Do this in a dark room. Screen should get dimmer with low light and vice versa. This is your test

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
En Yararlı Yanıt

Seçenekler

There is a Auto brightness toggle in the settings accessibly display accommodation area.

Toggle that on and off and it should change brightness automatically when switched back on.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

I just tried that but didn't notice any change. I disassembled the assembly again and noticed a black rubber gasket over the original light sensor, so I transferred that over and reassembled it and toggled the auto brightness again but still do not notice any difference. Am I missing something? Thanks!

tarafından

Front camera assembly is faulty as Auto brightness does nothing.

tarafından

Yorum Ekle

Seçenekler

The best way to test it is to make sure auto brightness is on, then when the brightness is all the way up, put the phone into sleep, put your finger over the sensor an wake up the phone. If it works, the screen should dim and get brighter when you remove your finger. (Do this in a bright room)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

We just hold them under a bright light under the microscope and watch the screen dim or brighten as we move the phone to and from the bright light

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Todd sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 11

Son 30 gün: 52

Her zaman: 16,481