Ana içeriğe geç

This receiver is Bluetooth Ready, has 110 Watts x 5 Direct Energy Amplification and is iPad / iPhone Certified with supplied cable

26 Soru Tümünü görüntüle

My receiver turns on and then shuts back off

My receiver turns on and then powers back down

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

@rule run the error detection service mode first.

Block Image

Block Image

Then start off by checking your power supply. Use the Pioneer flowsheet and a good multimeter to check those things. Let us know what you find.

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 4
Yorum Ekle

It's going into protection Mode. You need to either use a factory reset or take it in to have it serviced.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Relay or something I don't know

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Christopher rule sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 14

Son 30 gün: 40

Her zaman: 11,495