Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Repair guides and support for top and front loading Whirlpool brand washers.

Washer will sometimes not drain

I have a WTW8900BCO washer that sometimes will not drain. Each time I will pull the drain pump and reinstall and it works fine for a few days before not draining again. The drain hoses are clear. The unit is 4 years old. What do you think?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

3 Yorum:

This washer is direct drive so there is no belt. I am thinking it may be a electrical malfunction of some sort.

tarafından

Is it noisy?

tarafından

No it is not noisy. I hear humming for about a minute that sounds like the drain pump is trying to start. Then the Ld indicator light comes on. When I put it in diagnostic mode it shows F32. Both of these mean long drain

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

have you tried changing the belt ? if it is stretched you're most likely to get this problem.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

jsreece sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 90