1 Calculator pulses on and off, resetting ram and OS does nothing.
Here is what happens:
1) I pull out all batteries so the RAM can reset.
2) Put batteries back in and calculator starts working for about 30 seconds
3) Calculator shuts off by itself
4) Turn on, screen flashes real quick to display where I previously was, then shuts off.
5) #4 repeats until ram is reset again.
Things I have tried
-OS Reset
-RAM Reset
-Backup battery and battery replacements
-Cleaning connectors
I have another calculator I can sub out parts with.
Is it a capacitor or something I need to replace?
Bu iyi bir soru mu?
Puan
0
14 
7 
Honestly, it sounds like you need a fresh set of batteries. Have you tried different batteries? It doesn't say in your post if your batteries were fresh or not.
S W tarafından
Tried about 5 different sets of working batteries.
Steven tarafından
Try to power it without any batteries and plugging the usb cable into either the wall or a PC. Does it still behave the same way doing this?
Deano tarafından
Yes. The little windows, "da-doo" correlates with the screen flashing on and off (when I can get it to stay on long enough).
Steven tarafından