Eşyalarını Tamir Et Topluluk Mağaza

The Zebra LP-2824 is a thermal label printer.

3 Soru Tümünü görüntüle

Seçenekler

TLP-2824 wont stop feeding blank labels

I have a TLP-2824 printer by Zebra

When powered on, the printer will not stop feeding blank labels. The only way to get it to stop is to shut off the power. I have tried doing a calibration by holding down the feed button while turning the power on, the printer will go thru the calibration steps, and the continuous feeding of the labels continues. Pressing the feed button will also cause the printer to continuous feed labels. Does anyone have any idea how I can fix this?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Sounds like it's the sensor that looks for the gap in the labels. I've worked on a more industrial Zebra printer, and they have a red light near where the labels come out. If you move this towards you (i.e. to the right of the printer from the front) it can help it

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

peterfang sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 19

Son 30 gün: 55

Her zaman: 4,657