Eşyalarını Tamir Et Topluluk Mağaza

Mid 2006 / Model Number: A1181 / black or white case / 1.83 or 2.0 GHz Intel Core Duo processor

20 Soru Tümünü görüntüle | 55 Parçalar Mağaza

Seçenekler

Took off topcase and reseated heat sink...MacBook will not start!

I followed the guide for removing the topcase and the guide for replacing the heat sink. I couldn't get the arctic silver thermal paste so used a spirecoolers.com which i got at a local computer store.

Reassembled everything and now laptop won't turn on!

Please advise.

Update

Ok, thanks Majesty.

I did double check that; and it still wouldn't turn on. So I took out the battery and mag charger, held the on/off button for 10 seconds and put the battery and magcharger back on. Still nothing.

But then this morning, I tried checking and it worked! No idea why though....is there usually a delay in the startup process?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

The first thing I would check id the ribbon cable that's connected to the LogicBoard from the topcase. Make sure that connector is properly seated. U should hear/feel a slight thump when the connector is fully seated. Check that first, then get back to us.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

also if you remove the top case and can dis-connect the connector to the RTC battery (assuming your model has the external one). Its the backup battery. With that and the main battery disconnected, you should be able to plug in AC power and the machine should boot up

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

spencerprou sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,058