Eşyalarını Tamir Et Topluluk Mağaza

2015 Mart ayında duyurulan ve 10 Nisan 2015’te piyasaya sürülen Galaxy S6, Galaxy serisinin önde gelen ürünüdür. Kavisli ekran versiyonu Galaxy S6 Edge olarak bilinir.

487 Soru Tümünü görüntüle

Seçenekler

My phone don’t turn on fully after upadate

Hi guys

So I’m recieving this real silly issue about the Samsung logo after an update.

I just keeep reviewing Samsung logo when I turn it on.

This happened directly after updating to the latest version

I have tried using Odin to repair it but every time I received failed rather than pass. I tried a few times around 5 times to receive the same answer.

I was wondering if anyone would be kind enough to help me solve the issue thanks.

Thanks in advance.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

I’m receiving other issues with my phone now appears with this message. Any help is great.[image|1445494]

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Are you flashing the correct model firmware and also with matching region code?

You can find your region code by force turning off the phone if it's bootlooping via volume down + power + home for about 10 seconds.

When it goes off immediately hold power + volume up + home then release power when you see the samsung logo.

Keep holding other buttons until you see the light blue recovery screen.

Then wait for a bit and the recovery menu should appear and display some text.

Look for applied multi-csc code: xxx

xxx will be your region code, follow that and you will know which region firmware to download for your phone when you download from Sammobile or Updato.

Also take note of the model number printed on the back of the phone and in ODIN download mode, either should be matching the downloaded firmware model number.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

Hi thanks for the reply I’ll give it a go and try again. maybe I’m just not doing something correctly.

If I need any more help I’ll let you know thanks.

tarafından

I forgot to tell you, if your firmware is too up to date it wont allow flashing of older firmware in some cases.

It will usually not allow you to flash the first few files called sboot due to mismatch security bit or something like that.

What does it error on by the way? Usually I can tell what is causing it.

tarafından

Yorum Ekle

Seçenekler

It’s like right at the end

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Rakesh sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 48