Ana içeriğe geç

What voltage is supplied to the inverter?

I'm removing the display from the iMac g5's case and using it as a standalone monitor. However, I can't figure out what voltage is being supplied to the inverter from the 6-pin connector on the logic board. Any ideas or pinouts?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

From the PDF: To start L! inverter one needs 3,3V Run on the fi L n°2 the brown one is connected to the 12V Run and the fi L 3 is connected to the GRD the fi L n°1 (not connected) rule the luminosity and is with 0V.

The PDF is in French you can use Babel Fish or your favorite interpreter for the information you are seeking.

http://users.skynet.be/fa835376/pas%20a%...

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

This answer might be able to help you: Display power inverter pinout or voltage for each of 6 pins needed?

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

AB you might want to make this clearer and enter it as an answer. My answer is just a link. Your answer has a lot more info than mine.

tarafından

Yorum Ekle

Yanıtını ekle

Joel Beeby sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 1,159