Drier won’t start just flashes error code LOC
Error code LOC. It won’t start and just flashes LOC
Bu iyi bir soru mu?
Puan
1
490395
1 Cevap
Seçilen Çözüm
İtibar: 783,9b
1,1b
894
2,3b
@xxxxxxxx sounds like your dryer’s controls are locked. Try this first:"
Press and hold for 3 seconds the "Control Lock/Unlock" button on the control panel to lock the control panel. Listen for a double beep and observe the "Control Lock" status light is lit when the control lock is in effect. Press and hold for 3 seconds the "Control Lock/Unlock" button on the control panel to unlock the control panel. The "Control Lock" status light is goes out when the control panel is unlocked.
There are different model variations so let us know your dryer’s exact model number.
Bu yanıt yardımcı oldu mu?
Puan
4
My module number is 417.81102000. Loc is on mine too tried everything my dryer still won’t come on
@speedwagon3 so same situation? Won’t start and just flashes LOC? You tried the above and no change?
I just did it on mine and it worked
kenmore model # 529 89155.....child loc symbol flashing...will not srart. help
min too...displays LOC no matter what i try...ugg
1 Yorum
Model number 51781100000
tkplexus tarafından