Eşyalarını Tamir Et Topluluk Mağaza

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Soru Tümünü görüntüle

Seçenekler

LCD Inverter, Cable, or Screen?

Hi,

Initially, I thought I had a bad logic board until I reset PMU & PRAM, formatted hard drive, and then reinstalled OS 10.5. Boots fine now with no boot/startup issues.

So, my current issue is that I have an screen that has colored vertical lines, a dual image, and a significant black area. Video works flawlessly when connected to an external monitor. Thoughts on whether this could be just an inverter/cable ? Or is it likely the entire lcd ?

See attached pics to see what I'm getting.

http://www.heifetzconsulting.com/images/...

http://www.heifetzconsulting.com/images/...

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

It is not the inverter that only affects the backlight. It could be the LVDS cable or it is not seated properly in the sockets. If the problem gets better or worse by you moving the upper part of the laptop at the hinge it is the LVDS cable, unless you find a bad connection at either end of it. If you haven't found your problem yet then the LCD will need replaced.This guide covers the procedure for LCD replacement. You would use the same guide to replace the LVDS cable. There are several models of your laptop. Please give us the last 3 digits/letters of your serial number and we will locate the correct parts for you.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

3 Yorum:

I def have the 1.67Ghz Low Res, the A1107

tarafından

Display data cable/LVDS are here: [bağlı ürün eksik veya kapalı: IF155-046]

tarafından

The LCD is here: [bağlı ürün eksik veya kapalı: IF155-049]

tarafından

Yorum Ekle

Yanıtını ekle

Clint Wagner sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 2,307