Eşyalarını Tamir Et Topluluk Mağaza

Model A1502 / 2.4, 2.6, or 2.8 GHz dual-core Intel processor / Released October 2013

552 Soru Tümünü görüntüle

Seçenekler

MacBook Pro late 2013 13” PPN001 PFM006 fan at full speed and slow

My MacBook Pro late 2013 suddenly became slow and fun running at full speed, due to the region I’m in there is no autorized apple support store, went to a apple reseller and they told me that the battery is causing the problem due to old age and 1030 more cycles. I have TP showing that the battery is actually at good condition but GPU temperature senseor might not be working properly and coconut battery app showing the battery in good condition. Used the apple diagnostic and got PFM006 and there many be an issue with the power management system ref code PPN001, which I can’t find any of this ref code.

PPN001 not typo see photo.

Block Image

Any ideas, please

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 7
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

This error is often related to liquid damage (corrosion around the battery connector). Did you have a spill or sit the system down on a wet surface? It’s also possible the area where you live is very humid which can also cause issues.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Hi dan, thanks for answering, I just went to another store, they opened the back case, and one of the six pack is inflated, do you think it is posible that this is the reason? They still insist that changing the battery will fix it.

I was living in a very dry region and traveled to a quiet humid region for a week when the problem started, will changing the battery solve the problem?

Thanks again.

tarafından

Yes a swollen battery does need to be replaced!

tarafından

Yorum Ekle

Seçenekler

Same problem happend to my MBP 11,1. The battery pack is OK. Tried with refit and SmcFasher.efi -reset 1 to reset my SMC, because Shift-Ctrl-Alt didnt work. SMC reset via refit has no effect. Think, that my Logic board is broken

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

4 Yorum:

Guys try replacing the keyboard.

tarafından

@jethro1000 - Altering the firmware to fix a bad keyboard is not a smart thing! Sounds like you has a liquid spill and you need to replace the keyboard and/or trackpad

tarafından

Thank you very much - same problem was with my Mac and replaced touchpad fixed it.

tarafından

I had the same issue with my MacBook pro open it up to take a look at the trackpad as the trackpad was unresponsive intermittently. The owner that I got the MacBook from must have spilled something near the trackpad as the water indicator was bright red and I had some corrosion on the track pad itself. Same diagnosis fan running at full right after boot up and the system is just overloaded and slow. $40 later on used trackpad on eBay and the issue is fixed. Since I already had the battery off which was a pain to unglue I went ahead and installed a new battery as well since I already had it open. But the issue was fixed before the battery was installed. Hope this helps at all

tarafından

Yorum Ekle

Yanıtını ekle

Marco Antonio Valdivieso sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 33

Her zaman: 14,427