Ana içeriğe geç

30 amp plasma cutter that can cut up to 3/8in mild steel.

1 Soru Tümünü görüntüle

Anyone Have a Miller 375 Plasma Cutter Service Manaul

Anyone have a Service / Tech. Manual or Board Schematic For a Miller 375 X-TREME Plasma? Serial Number Range: LG130001P through LG190233P

http://www.stevenrhine.com/?p=3131

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
3 Yorum

@contract_pilot I wonder if this board is not bing used in other equipment as well. Do you have any identifier etc. on the board itself?

Rep: 1

tarafından

Just the Miller Name and Part #

tarafından

this article related to miller plasma cutter might be this will help you alot, https://tapweld.com/miller-plasma-cutter...

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

I have the schematics they are located at the link below.. I have them for 2 different versions the the board.. http://www.stevenrhine.com/?p=3131

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Is this what your looking for? https://www.millerwelds.com/files/owners...

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Sorry, No. That is an Owners Manual and Not Even the Right Model. The Service and/or Technical Manual is for the Repair of the Plasma Contains Schematics Etc.

Once Can get the Owners and Parts Manuals Online but once has to be a Service Center or Know Someone to get the The Service and/or Technical Manual until the model is no longer in production.

This policy has now given me a bad taste about miller they used to be so open on service manuals...

tarafından

Yorum Ekle

Yanıtını ekle

Steven Rhine sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 7

Son 30 gün: 16

Her zaman: 428