Ana içeriğe geç

Clothes dryer repair and support guides.

872 Soru Tümünü görüntüle

My kenmore dryer 81122 has Rotating blinking lights.

i put the dryer recently on normal 1 hour cycle , no wrinkle guard and after a few minutes it shows rotating blinking lights. Sometimes it stops mid cycle. There is no wrinkle guard on . It never did this before, first time! Can anyone tell me what is wrong with the dryer.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

I have same issue for kenmore dryer

Anyone found solution to this?

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Rotating blinking lights in the display is probably an indication that the Wrinkle Prevent option has been selected. Wrinkle Prevent will continue to tumble the dryer without heat after the cycle has ended to help prevent wrinkles from setting in. When this option is selected by pressing the Wrinkle Prevent button on the control panel, the display will count down the estimated cycle time; when the cycle ends, the display will show lights blinking in a circular (or actually rectangular) motion.

To deactivate, simply press the Wrinkle Prevent button again so the light is not illuminated.

Bu yanıt yardımcı oldu mu?

Puan 2

2 Yorum:

The light is not illuminated. i posted the video showing the wrinkle prevent was off. yesterday the dryer did the rotating blinking lights again and stopped before the cycle was over.

tarafından

I have the very same problem, the dryer works only for a few minutes and then shows rotating lights and some time later has 3 blinking lights. Clothes are still wet

tarafından

Yorum Ekle

I found that one pin of the 3 pin power lead (110 VAC) was partially damaged, perhaps not proiding enough current for heating. After the lead was replaced the dryer has been working perfectly.

Jolanta

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yeah, because the dryer has a choice, when Wrinkle Guard is off, when your dryer gets to cool down mode, it now shows 10 minutes left

When Wrinkle Guard is on, when you dry finishes with the drying cycle and wrinkle guard is on your dryer stays on, but if wrinkle guard is off and when your dryer finishes cool down mode, then your dryer stops working.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

JANET DEJESUS sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 43

Her zaman: 1,674