AK PRO 5 in1 Laminating Machine Bubble Problem

Question

iPhone 7

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2265 Soru Tümünü görüntüle

AGS @ags_studio

İtibar: 243

6

22

Gönderildi: 6 Eyl 2018

Seçenekler

AK PRO 5 in1 Laminating Machine Bubble Problem

Hi Everyone.

I bought AK PRO 5 in 1 for Laminate iPhone Broken LCD.

The problem is the Bubble.

I try it with same Parameters suggest form reseller, but the problem is same.

I change the temperature do different setting but the problem is same.

Is someone use a same machine who suggest me something…

The setting I use is :

Vaccum Time : 15 SEC

Lamination Time 15 SEC

Outgassing Time : 5 SEC

Debubbling Time : 6000, SEC

Temperature : 40 C.

The Modul who i use when i put the LCD inside the machine black (check the PIC)

Thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

4 Yorum:

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro.

arnasseip tarafından 7 Tem 2019

I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation

David Alonso tarafından 17 Ara 2019

I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine

Collins Ilondu tarafından 22 Kas 2023

perhaps you have problem whith inside pump

Marco tarafından 27 Kas 2023

Yorum Ekle

1 Cevap

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro. — arnasseip
I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation — David Alonso
I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine — Collins Ilondu