Ana içeriğe geç

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1502 Soru Tümünü görüntüle

3GS front panel and screen fallen out with screws still in

I have recently found my own old 3GS I tried charging and the apple logo appeared and went off numerously over many hours never powering on I assume it will need a new battery later the entire LCD started falling out from the top and the entire screen came out but the screws were left in. do all replacement screens come with new screw attachments and how can I keep the screen in if not.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

You can buy replacement screws from here, no need to buy a new screen if the old one works fine. ;-)

Update (09/26/2018)

@jbb25 Tesa tape is a wonderful adhesive. I believe that 2 mm Test tape would work great for this purpose as it is very strong. Just use as much as you can to hold the screen down without going over electronics or circuit boards.


Tesa 61395 Tape

Tesa 61395 Tape Görseli

Ürün

Tesa 61395 Tape

$5.99

Bu yanıt yardımcı oldu mu?

Puan 0

3 Yorum:

Thank you but some of the screw brackets are still in the phone rather than the screen could I screw them out and glue with fast drying super glue back on.

tarafından

@jbb25 Ohh, sorry about that! I thought you needed screws. Sadly, iFixit does not sell a replacement screen so I cannot confirm or advise against what your idea is. I am skunked!

tarafından

Thanks for your help anyway Aaron Ive just checked eBay and found a few adhesives hopefully I can reattach the brackets and refit the screen back in after the new batterie has gone in.

tarafından

Yorum Ekle

Yanıtını ekle

Joshua Borthorpe Bain sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 8

Her zaman: 50