Eşyalarını Tamir Et Topluluk Mağaza

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Soru Tümünü görüntüle

Seçenekler

How to replace the metal cover of the sim reader

My iphone sim reader and the metal bracket that cover it need to be replace. I can handle the sim reader, I think. but does anyone know how to replace the metal bracket that covers the sim reader. Does it need to be soldered on or can I just glue it on.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
1 Yorum

Thanks but it was broken so I had to take it off. Can I just stick it on, I think its only function is to retain the sim card and tray

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I've always done the repairs with the bracket in place. If it isnt preventing the sim tray from going in, then leave it be, you can do it from front side if you have a small enough iron.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

2 Yorum:

Thanks but it was broken so I had to take it off. Can I just stick it on, I think its only function is to retain the sim card and tray

Thanks but it was broken so I had to take it off. Can I just stick it on, I think its only function is to retain the sim card and tray Submit

tarafından

Yea all it does is just retain the tray. If the tray stays without it, I would leave it out.

tarafından

Yorum Ekle

Yanıtını ekle

Maureen Kelly sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,046