Ana içeriğe geç

Model zd8000, 17" Widescreen display, 2.8-3.6 GHz Intel Pentium 4 processor

8 Soru Tümünü görüntüle

repairing pwer adapter on motherboard

following your instuctions to remove bottom plastic cover, got to removing the dvd player  where you say push pin in hole to open dvd player, the player opens, but the rest of the player will not budge from the hole no matter how hard I pull, help

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Is your DVD player bent in any way, shape or form? If not, try doing the pinhole release one more time but push as hard as you can into the pinhole. That way if for some reason the release button is stuck it will become unstuck. Just my two cents.

Bu yanıt yardımcı oldu mu?

Puan 0

7 Yorum:

did the pin hole thing, and slid the dvd player out but the rest of the dvd player assembly wont move from the slot

tarafından

need someone to tell me how to remove the complete dvd player assembly from the laptop hole

tarafından

I understand, but is the DVD player bent? Have you tried the thing I suggested above?

tarafından

no player not bent just wont budge from slot, are there any more screws that need to be released

tarafından

Thats very odd then, there are no other screws that need to be released or button to be pressed. I am skunked on this one.

tarafından

2 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Jack Carruthers sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 69