Eşyalarını Tamir Et Topluluk Mağaza

Mid 2009 Model A1278 / 2.26 or 2.53 GHz Core 2 Duo processor EMC 2326

745 Soru Tümünü görüntüle

Seçenekler

3 Beeps after installing RAM

I purchased 2x 4GB PC3-L 12800s DDR3 1600MHz and installed both sticks, got 3 beeps when trying to boot. I removed 1 new stick and installed old 1GB stick and Mac booted up just fine.

I then found out that these were the wrong RAM for my mac and so I removed the new RAM and bought and installed 2x 4GB PC3-8500 DDR3 1066MHz and got the 3 beeps again. I removed one and installed the old 1GB stick, and got the 3 beeps again. I tried every combination using the new and old or the new only and still getting the 3 beeps.

Help please!!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

Is the beep pattern identified on this list?

https://support.apple.com/en-us/HT202768

tarafından

Is the 'old' setup not working anymore ?

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Exactly which machine do you have? Please go here and input your serial number from the back of your machine in very fine print:

https://everymac.com/ultimate-mac-lookup...

UPDATE

Thanks for giving us your exact machine.

Install the original RAM. Zap the PRAM

Here's how to reset your PRAM:

  • Shut down your machine. Yes, all the way down, not sleep or logging out.
  • Press the power button and then press command-option-p-r. ...
  • Hold those keys down until your Mac reboots again and you here the startup chime.
  • Let go of the keys and let your Mac reboot normally.
  • If this works, install one of the new chips and boot, then do the next one.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

6 Yorum:

MacBook Pro "Core 2 Duo" 2.26 13" (SD/FW) 2.26 GHz Core 2 Duo (P7550*)

Intro. June 8, 2009 Disc. April 13, 2010

Order MB990LL/A Model A1278 (EMC 2326*)

Family Mid-2009 13" ID MacBookPro5,5

RAM 2 GB VRAM 256 MB

Storage 160 GB HDD Optical 8X DL "SuperDrive"

Complete MacBook Pro "Core 2 Duo" 2.26 13" (SD/FW) Specs

tarafından

Firstly, thank you for all your help.

I reset the PRAM with the original RAM, then replaced the 1 and tried to reset the PRAM however I got the three beeps...

:(

tarafından

Try the same thing with just one stick in each slot.

Reset the SMC:

Connect the power adapter to the Mac. On the MacBook / Pro's keyboard, hold down the Shift+Control+Option keys and the Power button at the same time. Release all keys and the power button at the same time – the little light on the MagSafe adapter may change colors briefly to indicate the SMC has reset.

Connect the power adapter to the Mac. On the MacBook / Pro's keyboard, hold down the Shift+Control+Option keys and the Power button at the same time. Release all keys and the power button at the same time – the little light on the MagSafe adapter may change colors briefly to indicate the SMC has reset.

tarafından

So, resetting the SMC didnt work either :(

tarafından

My smc wouldn't reset either

tarafından

1 tane daha yorum göster

Yorum Ekle

Seçenekler

The “data corruption” 3 beep pattern during the power-on self-test means that you (most likely) still have the wrong (or static-electricity damaged!) RAM.

Go to crucial.com and find out what the right RAM is.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

I have the exact RAM that is specified on the site you suggested...

tarafından

Yorum Ekle

Yanıtını ekle

kianicolaou sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 14

Her zaman: 3,953