Eşyalarını Tamir Et Topluluk Mağaza

Vizio 42" LED TV released in September 2012.

45 Soru Tümünü görüntüle

Seçenekler

Why is my power board burning?

I’ve had my Vizio model M471i-a2 for about 4 years, and about a week ago it started emitting a strong burning smell, and then the top of the screen started having Black flickerings. Took off the back and saw a substantial burn mark on the power board.

Block Image

Ordered a new board and put the new one in Saturday. Now (Monday night) the same thing is happening all over again to the brand new board!

Block Image

Update (11/27/2018)

Here’s a picture of the other side

Block Image

Update (11/28/2018)

Thank you turkey! Here’s a pic of the whole side of that board in case that’s helpful:

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
5 Yorum

Did you try connecting power through a different outlet?

tarafından

Yes I did try another outlet

tarafından

I have the same problem, did anyone find a solution for this?

tarafından

Hey dude, it did end up being my LED backlights. I wish I would have known that before purchasing new boards, as it will just burn through any new board you install.

tarafından

I have this same issue on the same model tv. Same burn marks on same board. Do I need to replace the backlights and the board or just the backlights?

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

@tardisgrooves

that is the cold side of the board and we really would need the underside of it as well. We would need to figure out what circuit those jumpers belong to. From their location I would think that this might be an issue related to the LED backlights. You can always try another board but do not connect the backlight connector and see if it does the same thing. without a schematic it could be difficult to check it any other way.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

3 Yorum:

New pic below

tarafından

@tardisgrooves those look like MOSFETS Most likely for the LED boost circuit. I will try and see if I can find a schematic to verify this.

tarafından

Thank you turkey! Bigger pic below

tarafından

Yorum Ekle

Seçenekler

I have the same problem If replaced the unit and it does again then what is the problem ?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

Jonathan - LED backlights

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Carey sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 727