Ana içeriğe geç

The first generation RAV4, known as the XA10 series was constructed on a unique platform that shared Carina and Corolla elements. It launched in Japan in May 1994.

7 Soru Tümünü görüntüle

Starts but runs rough!

I have a 1999 Toyota Rav4 2.0L and I've replaced coils, plugs, timing belt, crank sensor and cam sensor, did continuity test from crank sensor and cam sensor to the computer and the wiring checks out ok, but its still throws a p0340 code for cam sensor, any ideas would be greatly appreciated

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

Yes, checked all wiring and did continuity test from crank and cam sensor connector to ecm connector and checks out ok, thinking it may be the ecm but wanted a second opinion I guess

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Engine vacuum leak will cause it to run rough and can throw ecm / cam sensor code

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

checked wires? follow the harness back, look for breaks or rubbing.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

Maybe bad one out the box?

tarafından

I took it back off, did ohm reading and passed a piece of metal in front of it and its putting out correct voltage!

tarafından

Yorum Ekle

Yanıtını ekle

crogers_2882 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 6

Her zaman: 247