Ana içeriğe geç

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1963 Soru Tümünü görüntüle

Soldering the LCD connector

Hi,

what temperature should i use to solder the pins on the LCD-connector (1). The former owner pulled a little bit to hard, now some of the pins are...lets say disconnected.

I use a WELLER EC 2002 with a very fine tip and i already looked for a new LCD. So why shouldn´t i try to solder it, its ruined anyway.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

If one of these answers fixed your problem please hit the "accept" in list that has "History Edit Flag Accept Comment" located to the upper right of your question so we can remove it from the unanswered list. Thanks.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

I wanted to solder the connector back to the cable of the LCD. I've tried it with 320°C but that didn't worked. A day later the new LCD arrived so i didn't tried it anymore.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

The temperature has to be above 320°C...just to get it off the unanswered list.

tarafından

thanks

tarafından

Yorum Ekle

I am not clear on what you are soldering. The connector that the LCD plugs into on the logic board?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Crisb sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 4,449