Ana içeriğe geç

Repair and disassembly guides for the Nerf Elite Triad EX-3 released in 2013.

1 Soru Tümünü görüntüle

Dart not going all the way in

The darts will not sit all the way in the chamber. They will slide out about a 1/2 in, this not fire correctly

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

nerf guns are picky about their ammo sometimes, that gun in particular is really picky, darts from HB or Walmart nock-offs have slightly different inner diameter then Nerfs….. also kids chewing on them doesnt help in my experience. . my kids will eat anything..

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I have the same problem. It is just one chamber, all the time. Doesn’t matter which darts (I’m only using the 3 Elite darts that came with the gun.... since it’s my child first one). The other two chambers always work and the third chamber always pops the darts out an inch. I’ll probably try to dissemble and see if I can figure out what’s going on

tarafından

Yorum Ekle

So as its not going in fully i taped some paper to the dart shown in the below picture and it worked cause it was loose

Block Image

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Raymond Hylton sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 9

Son 30 gün: 16

Her zaman: 673