Ana içeriğe geç

A 64.52" LED 2160p 4K UHD Television released in 2015.

13 Soru Tümünü görüntüle

must power cycle to get pix

VIZIO P702ui-B3 If off for more than a few hours the led (lower left corner) lights, Audio works, but no picture. If power cycled 2 or 3 time it turns on normally.

This happens with the remote or the manual switch on the set.

I’m thinking about replacing the power supply. Could that fix it or perhaps the Tcon board?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

I had a similar problem with my P55-C1 (audio, no picture). I used a flashlight and discovered that the picture was actually working but the backlights weren’t coming on. I replaced the LED driver boards (four of them) and now I have a working picture again.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

where do you find a driver board? Would you post a tutorial on replacing it please?

tarafından

Yorum Ekle

Yanıtını ekle

Greg “Bad Kitty” Arikian sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 4

Her zaman: 321