İtibar: 13
2
Yesterday i repair my MBP ( Nvidia Graphic Chip ).
Now he is running but the fans turns constantly 6000 rpm.
it may be that I forgot to connect a cable?
The temp sensors work correctly according to istate pro.
Please help me
ps. sorry for my bad english :)
Bu iyi bir soru mu?
İtibar: 26,3b
152
71
50
You haven't given much information to go by, including the readings from iStat.
You may have a process such as a stuck print job causing your processor to run in excess. To find the process: From the terminal type top -u -s3 (to take samples every 3 seconds) and look at the output. This will give you the PID of the offending process. Write down/remember the PID. In the terminal you then enter kill -9 PID number. For example
kill -9 1111
This will kill the process 1111.
Also please tell us the process you used to reset the SMC.
Bu yanıt yardımcı oldu mu?
MBP is running.I forgot the temp sensor cabel under the right fan.... Thank @ all
İtibar: 32,1b
104
61
76
SMC reset would be a good start
THIS LINK should hekp
Bu yanıt yardımcı oldu mu?
I already made smc reset.did not function
You may need to disassemble and clean your heat sinks. When they get loaded with dust and dreck your laptop will run hot. I need to do it every two years or so on mine.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 2
Son 30 gün: 3
Her zaman: 1,571
1 Yorum
Please explain about repairing your Nvidia chip. Did Apple do this as a recall?
mayer tarafından