Eşyalarını Tamir Et Topluluk Mağaza

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2264 Soru Tümünü görüntüle

Seçenekler

Touch ID makes screen swipe up and down after screen replacement.

I just replaced the screen and it was working fine, but i kept opening up the phone to try and fix a problem with the proximity sensor, but now I have a new problem. Watch the video.

Also, can anyone help me with the proximity sensor? I can’t get the screen to turn off when I put it up against my face. I’ve already scraped out some of the circle so that there’s no chance of it being to dark.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

It looks like it could be a bad screen/scanner. You may have to buy a new one. It is very unlikely but possible it is a software issue that requires a reset. I would back it up the reset it, an if that doesn't work, then I would install a different screen and scanner

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Hi Benjamin,

I just replaced the earpiece on my iPhone 7 and everything is working fine except for the exact same problem you have.

When Touch ID is required and I touch the sensor the screen starts to jump up and down. When trying to add a new fingerprint I noticed that the finger is not recognized.

Could you solve the problem?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Benjamin Gabriel sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 10

Her zaman: 667