ÇÖZÜLDÜ: Why is my SSD hard drive not being read by Mid 2010 MacBook Pro - MacBook Pro 15" Unibody Mid 2010

Why is my SSD hard drive not being read by Mid 2010 MacBook Pro

I’m having problems with my Mid 2010 15” MacBook Pro 2.66 GHz i7.

I recently purchased a Crucial MX500 SSD SATA 6Gb/s 2.5” SSD to replace the old HDD.

When I reboot the laptop up, it won’t recognize the new drive. I was told this SSD type would work, was this wrong? If so, what type of SSD should I get? Is it not working because it’s 6 Gb/s?

I use my MacBook for photoshop and writing word documents so I really need the SSD that can keep up.

Thanks!

Gönderildi: 17 Şub 2019

Seçenekler

I can’t speak for Crucial on their drives specs. They don’t list SATA II 3.0 Gb/s compatibility in their data sheet. They only state SATA III (6.0 Gb/s).

Unlike Crucial Samsung lists full compatibility with their SSD’s Samsung 860 EVO SSD.

Your system is only SATA II (3.0 Gb/s) so you do need a SSD that is compatible with your system. A common issue with the MacBook Pro’s is a bad HD SATA cable. I do recommend replacing it MacBook Pro 15" Unibody (Mid 2012) Hard Drive Cable and yes this is for the 2012 model which offers a better cable design and will work in your system too. I also place a strip of electricians tape on the uppercase where the cable crosses over to help protect it from the rough surface of the aluminum. You also want to arc the cable not crease it! The thin foil wires within the ribbon can be damaged when you over do it!

Ürün

MacBook Pro 15" Unibody (Mid 2012) Hard Drive Cable

$19.99

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

Yorum Ekle

MacBook Pro 15" Unibody Mid 2010

Why is my SSD hard drive not being read by Mid 2010 MacBook Pro

1 Cevap

MacBook Pro 15" Unibody (Mid 2012) Hard Drive Cable

Yanıtını ekle