Eşyalarını Tamir Et Topluluk Mağaza

The iRobot Roomba 655 Pet Series vacuum manufactured in 2012. Costco exclusive.

29 Soru Tümünü görüntüle

Seçenekler

My side brush will not stay screwed in during use...why?

This happens on a daily basis, the screws used are supplied by the vendor.

It started when I noticed one of the 3 brushes had been 90 percent torn off.

I replaced the brush assy, screwed it back on, but I kept finding it and the screw unattached in the house. Its like the socket is stripped. Whats a gal to do?

Also…

The entire front wheel assy will easily drop out of the bottom of my Roomba, even if I pick it up! Why is this?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

5 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I wrapped teflon tape around the screw and it seems to be staying in for now.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

That works too!

tarafından

Yorum Ekle
En Yararlı Yanıt

Seçenekler

If Roomba won’t help you, coat the screws with

Loctite Heavy Duty Threadlocker to hold them in place

https://www.amazon.com/Loctite-Heavy-Dut...

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 6

4 Yorum:

@mayer - I would just use fingernail polish ;-}

I find the Red Loctite can be a bit too strong so you can't take the screws out later. Low Strength (Purple) or Medium Strength (Blue) maybe better choices.

tarafından

@danj I like the Red on larger screws and the blue on small computer screws. The checkout guy looks at me funny when I buy nail polish.

tarafından

@mayer - Just tell the counter guy its for your dogs nails ;-}

I personally use clear for by screws ;-}

tarafından

Blue loctite doesnt work for me

tarafından

Yorum Ekle

Seçenekler

Sounds like your unit is either defective or encounters a lot of vibration so the screws don’t stay secured.

I would recommend you speak with Roomba directly to see if they are aware of the screws loosing up as well as get the missing bracket and screws for your front wheels. Depending on when you bought the unit they may exchange it.

iRobot

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Seçenekler

The replacement brushes we got won’t fasten to the white bracket. Feels like screw is too short or the plastic threads are stripped.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

I put a little piece of dental floss in the screw hole. When replaced the brush, the screw tightened firmly and the brush worked fine.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Jeanne Stilley sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 9

Son 7 gün: 62

Son 30 gün: 245

Her zaman: 8,302