Eşyalarını Tamir Et Topluluk Mağaza

The 2013 revamp of the desktop Mac series known as the Mac Pro.

117 Soru Tümünü görüntüle

Seçenekler

Detects internal speaker in System Preferences but no sound

No boot sound and no sound when in OS (10.14.3). System Preferences shows that the internal speaker is there. I can plug in headphones and the output source changes to headphones and sound does play through them. I've replaced the speaker, I/O Board, and cable that connects I/O Board to logic board. I've tried resetting SMC and PRAM. I've booted to a live Linux USB and sound doesn't work there either. I've run out of ideas besides replacing Logic board and/or CPU riser board. Thanks for the help.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

What does the Sound control panel show as far as Output?

tarafından

Internal Speakers

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Did you replace the Port board? It has the DAC chip (Cirrus) on the same side as the speaker. I’m suspecting the one of the trace lines going to it from the speaker is your problem. Check the solder joints on the chip and the surrounding area. Trace the speaker connection to the DAC

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

By port board do you mean the board the speaker plugs into? If so then yes it's been replaced. I could look at the DAC chip I suppose but I don't have a reflow station if that is the issue.

tarafından

Yes, the speaker ties to the DAC so either the connection at the speaker or the solder joints on the DAC and the SMD around it had an issue.

Also you might want to double check the speaker I think its a 4 Ohm unit.

tarafından

Yorum Ekle

Yanıtını ekle

undrgrndneo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 4

Her zaman: 73