Ana içeriğe geç

Repair and disassembly guides for Kenmore Microwaves.

182 Soru Tümünü görüntüle

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 3
1 Yorum

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I have the same problem with my Kenmore microwave. Is this the part I need? https://www.searspartsdirect.com/product...

tarafından

Yorum Ekle
En Yararlı Yanıt

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Ken Thome sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 9

Her zaman: 1,034