Ana içeriğe geç

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2264 Soru Tümünü görüntüle

Taptic/Vibration engine not working

Ok so long story short, the iphone got wet. They had changed the battery not long before but it seems they didn’t apply the glue well so it was cleaned inside and out. The first thing to go was the vibration motor, so i turned off, opened it and started the fix . i changed the taptic motor, lcd, and flex charge port. All works perfectly well in the phone except the vibration. i have already done everything (dfu, reset etc.) and still nothing. i haven’t still reseated the lcd until atleast i know what could it be. any ideas will be greatly appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Since you already replaced the Taptic engine and the lightning connector, there’s nothing left except the logic board unfortunately. After liquid damage was the iPhone properly decontaminated ? If all it was done was a battery replacement you may expect other issues too down the road.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Mike sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 105