Eşyalarını Tamir Et Topluluk Mağaza

Model A1010 or A1104

99 Soru Tümünü görüntüle

Seçenekler

trackpad or clicker not working on my PowerBook 12" G4 al

I just repaired my Powerbook G4 12" 1.5 GHz machine by putting in a new logic board. Everything is working fine but my trackpad is not working. I swapped another top from a machine that I know had a working trackpad. However, after replacing it, it still doesn't work. I checked the connector from the logic board to the upper case and the plug looks like it is connected. Any suggestions? I am using an USB mouse instead of the trackpad at the moment to get around the desktop.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
1 Yorum

just changed the upper case again to another upper case and I still am having the same problem.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Check the pins on the logic board connector to see if any are bent over and not connecting properly.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

3 Yorum:

Glad I could help solve your problem ;-)

tarafından

I just checked the pins and they don't seem to be bent. I am assuming that you are referring to the connector that you can pull with the orange thing.

Question, do the other connectors to the left have anything to do with the trackpad. They seem to be connected to their things but as far as I know, there are only three wires on the upper board.

tarafından

thanks Mayer! I did a little spunger on the pins and moved them slightly. Everything is working now. thanks!

tarafından

Yorum Ekle

Yanıtını ekle

Yuri sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 13

Her zaman: 1,130