Eşyalarını Tamir Et Topluluk Mağaza

Model A1200 with 2.16 or 2.33 GHz Core 2 Duo processor

113 Soru Tümünü görüntüle

Seçenekler

No chime, black screen, white light steady

Hi guys,

If iMac is off, but power is plugged in, number 1 diagnostic LED is on.

If iMac is on, no chime, fans go max, black screen, white light stays steady and number 1 and 2 diagnostic LEDs are on.

If LCD unplugged and external monitor plugged in, can't turn off, it turns right back on, once external unplugged, it turns off.

Also tried with detaching everything (add on cards, hard drive, etc.), no results.

Maybe the power supply? Hope its not the logic board....

Any ideas?

Thanks!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

LED Startup Sequence

LED #1 = Power available.

If no LED is visible:

• Verify AC source

• Verify known-good AC cable is connected

• Verify cable connection between AC inlet and power supply

• Verify cable connection between power supply and logic board

• Verify power supply

LED #1 + LED #2 = Power available, and system is powered on.

If second LED is not visible when power button is pressed:

• Verify power button connection to logic board

• Verify power button functionality

• Verify cable connection between power supply and logic board

• Verify power supply

• Verify logic board

LED #1 + LED #2 + LED #3 = Power available, system is powered on, and video card found.

If third LED is not visible after power on:

• Verify that MXM video card is seated properly

• Verify logic board

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

5 Yorum:

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks.

tarafından

Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips.

tarafından

Thank you, so if third LED is not on, most likely logic board.

tarafından

Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html

tarafından

+ Good Kung Fu

tarafından

Yorum Ekle

Seçenekler

Hi S.M.

Have you finally fixed your iMac? What is the problem?

I have an identical iMac and the same problem as yours.

Thanks.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

Hi,

since it turned out the motherboard went out, I decided to not change it. For a little more I could buy a new iMac...

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

s m sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 14

Her zaman: 2,711