Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Model A1225 / Early 2009 / 2.66, 2.93, or 3.06 GHz Core 2 Duo processor

194 Soru Tümünü görüntüle

I want to know Bluetooth module pinout for iMac 9,1

I can’t seem to find the pinout for my Bluetooth module (BCM92046MD), as per photo:

Block Image

In particular I need to know which pins are for D- and D+


In an attempt to activate Handoff/Continuity, I’ve installed a BCM94331CD wifi-bluetooth combo card.

Wifi works fine, but bluetooth is unrecognised by System Profiler. That suggests to me that I need to connect to D-/D+ cables to my my wifi card adapter. I soldered up a dongle to what I thought were the D-/D+ lines on the old bluetooth cable socket. But when I tried to boot, I only got a chime, a white screen, and no further. So, I may have got the pins mixed up.

Any help would be greatly appreciated!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

You really need the combo card Broadcom BCM94360CD. Activating the Bluetooth on it. Take the current BT card out.

This is what I used iMac 2009, iMac 2010 and iMac 2011 – Apple Broadcom BCM94360CD – 802.11 a/b/g/n/ac with Bluetooth 4.0 kit

Bu yanıt yardımcı oldu mu?

Puan 2


Thanks Dan, but my understanding is that BCM94331CD is a combo card (same as BMC94360CD, but with Wireless-N).

Anyway, I think I found the pinouts here:


Yes, the board you have is the older one. I was not able to get it to work. But the real issue is the Bluetooth services on the combo board need to be used not using the older BT board. The kit is what you need as it offers the needed extension cables and the USB power & data connection the BT services uses.


Yorum Ekle

Yanıtını ekle

Andrew Vines sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 11

Her zaman: 366