Ana içeriğe geç

Kohler makes the gas powered engines for many different riding mowers & garden tractors both for home owners and professionals.

15 Soru Tümünü görüntüle

Why is my mower not wanting to engage the blades right?

2013 cub cadet 1050. When I engage the mower deck it wants to sputter to a stop. If I mess with the throttle a little it will come on and mow perfectly. Sometimes it just does its little sputtering fit and will engage. New belt, spindles, blades, and fuel filter.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

@stevenstickley make sure that you replace/clean the air filter and the spark plugs. A plugged air filter or faulty plugs can cause the engine to run rich. after you check on that I would recommend checking the choke/carburetor. If the mower still bogs down after that, the problems is most likely a carburetor. A good cleaning of the jets and float (needle valve) and setting the choke should work.

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

It runs perfect when the decks off and after the mower finally engages, that's what threw me off a little

tarafından

It sounds like it is choking when you put a load on the engine which is commonly caused by a carb that is running to rich.

tarafından

Yorum Ekle

Yanıtını ekle

Steven stickley sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 7

Her zaman: 72