Eşyalarını Tamir Et Topluluk Mağaza

Model A1502 / 2.6 GHz (Turbo Boost up to 3.1 GHz) or 2.8 GHz (Turbo Boost up to 3.3 GHz) dual-core Intel Core i7 processor with 4MB shared L3 cache.

494 Soru Tümünü görüntüle

Seçenekler

Popped DC-in Board socket off the logic board

MacBook Pro 13” Retina Mid-2014

A1502

Block Image

Block Image

Block Image

I’ve attached images to show what I’ve done.

In troubleshooting my MagSafe board, I pulled up on the board connector rather than out (I should not work on my tech when angry.) Is this something that can be fixed either myself or by a microsolder tech? Or will I have to resort to a logic board replacement?

I can get it to “sit” in the correct position (first photo), but obviously it will not stay

Thank you for your assistance - I can provide any additional details needed.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

That will need to be resoldered back on, the metal legs on the plastic connector is still there so that's good to use.

Any microsoldering technician should be able to that for you.

I did this silly mistake before with a battery connector, forgot to screw battery in so battery flew out with the part.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 5

2 Yorum:

Lol, glad to hear I'm not the only one..

tarafından

@benjamen50 - Courtney will need a new connector as the upper pin parts are sheared off. There are two legs per each contact the soldered part and the one above applying pressure. You'll need to find one from a junker board.

tarafından

Yorum Ekle

Yanıtını ekle

Courtney Gelety sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 86