Ana içeriğe geç

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Soru Tümünü görüntüle

Showing adapter plugged in, but not charging?

When I received my hand-me-down PowerBook G4 I knew the battery was shot, so I just ran it off the cord. It took me a year or two to get a replacement battery but by that time the adapter seemed to be malfunctioning because of the continuous usage.

But after having replaced both battery and adapter just last summer, my PowerBook is having problems again. Now the computer doesn't always recognize that the adapter is plugged in and I have to twist and turn it for it to pop up as plugged in. However, even then it sometimes doesn't charge unless I hold the adapter in place a certain way and of course it's NEVER in the same place at the same time.

Any ideas on what the problem might be and how to fix it?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Assuming your adapter plug is tight you probably need to replace your dc in board. Link to the guide provided. If you can borrow a power adapter and try it first. Good luck.

PowerBook G4 Aluminum 17" 1-1.67 GHz DC-In Board Replacement

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Kati Krieger sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 572