Eşyalarını Tamir Et Topluluk Mağaza

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

732 Soru Tümünü görüntüle

Seçenekler

Home button sticks and rotates

A1489 iPad button gets physically stuck, as in no tactile response is felt. It seems to have some rotation, and only clicks down when the square symbol is not rotated too far out of spec. I have tried cleaning it with rubbing alcohol per instructions found online, but I’m not turning up the right search terms as I get false positives with screen rotation issues.

What would I look for to fix it when I open it up? Ideally without buying new parts that cost more than a newer device. Thank you.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hi @lemass

Your best bet is to replace the home button and bracket assembly. Replacing that part will require you to open the device by removing the glass digitizer, which could break in the process.

I recommend that you replace the whole glass digitizer with a part that has the home button bracket pre-installed, like this one from iFixit. Here’s a look at the replacement guide as well.

Best of luck with this repair!

iPad 2 Screen Digitizer Assembly Görseli

Ürün

iPad 2 Screen Digitizer Assembly

$29.99

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

lemass sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 74