Eşyalarını Tamir Et Topluluk Mağaza

Repair Guides for HP Desktops.

361 Soru Tümünü görüntüle

Seçenekler

DMI tool for 00A system board error

Is there a HP DMI tool for 00A system board error. Missing product ID info causing aboot up error? I have all this info to enter into something… Thanks

Update (11/17/2019)

Mike:

Thanks for your quick reply. I have an HP Pavillion 510-a010, bought it new in 2016. I will try your solution and I have jumped the CMOS jumpers but that did not work. Is that what you are referring to? I also think the 4 pin molex cables may be an issue but we’ll see. Thank you, Stewart

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Unplug power supply.

Press power button until fans stop.

Reset BIOS. You don’t state which HP desktop model.

There is usually a jumper to short to clear BIOS to factory default. Often near Front Panel connectors.

Plug-in power cable and switch on.

How did it go?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

2 Yorum:

Do not turn on the pc while the jumper is shorted

tarafından

@captainsnowball Thanks.....Is this the CMOS jumper pins next to the password jumper pin? Andhowdo I 'short it'? And why? HP 510-a010 model

tarafından

Yorum Ekle

Yanıtını ekle

shaimson7 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 13

Son 30 gün: 45

Her zaman: 4,932