Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

31 Soru Tümünü görüntüle

Areas of screen unresponsive to touch after screen replacement

I am just about done with the iPad 6 Wi-Fi Front Panel Assembly Replacement procedure. The LCD is screwed back in with the new touchscreen connected. I turned on the iPad to test the touchscreen (before final step of removing adhesive strips and securing touchscreen down).

Home button works fine - iPad lights up and when I go to enter my code, the 4, 5, 6, 7, 8, 9, and 0 all seem to work but the 1, 2, and 3 buttons do not respond to touch. “Delete” and “Cancel” text buttons both work.

I am able to power down (by sliding across the top of the screen) fine. Tried a hard reboot but same issue persists.

Is this a problem with the iFixit replacement screen or could there be another issue?

Thanks.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Oh yeah I get this a lot with my iPad 6 screens just disconnect the screen cables and reseat them. For every one I do I plug them in two times to make sure.

I'm not sure why but with first click in it sometimes has dead spots on touch but when I reseat it is all working fine. Make sure to push down a bit harder than usual on each ends to make sure they are fully clicked into connector.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

Thanks! I will try this and report back!

tarafından

Belated update: this fixed it - thanks!

tarafından

Yorum Ekle

Yanıtını ekle

Matthew Wilson sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 24