Ana içeriğe geç

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Soru Tümünü görüntüle

Boots from battery, but not from adapter

Replaced the DC-in board. As soon as I plug in the adapter, the menu bar says "Not charging". It is not an adapter problem - I use the same as the one for my same unit. Logic board?? That would be a shame, since everything else works.

Something did change when I replaced the DC-in: when I press the power button I hear some sort of sound for maybe 2 seconds, as if it were trying to boot, but the sound dies, and pressing the button again does not repeat the sound, until I unplug the adapter, re-plug it, the sound returns on the first press. So it looks like it is getting power from the new DC-in board?

Then I had this thought: Can I do some soldering and make the computer think the adapter is the battery?

Update (08/12/2011)

Don't know how I can add to my answer to my own post? When I submit without typing anything here, I'm told that this field is required and won't let me submit. When I submit with this field filled in, I'm told that I can't answer my own question??

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Try switching the DC-In board to the other machine to verify it.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I can't, took the other unit apart. But I do hear a sound with the new DC-in / see my updated post. Any suggestions?

tarafından

Yorum Ekle

Yanıtını ekle

sieg deleu sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 397