Eşyalarını Tamir Et Topluluk Mağaza

Model A1199 / 2, 4, or 8 GB capacity

85 Soru Tümünü görüntüle

Seçenekler

Two small SMD passives knocked off the board when fixing water damage.

Hi all, I have a question about two small components on the logic board of an iPod 2nd Nano 2nd gen. There was some water damage inside it when I opened it, and I replaced caps on the other side that were damaged. However when I was working on the section right next to the battery solder joints, two tiny passive components got knocked off the board. I tried to find a schematic online for the board number 820-1995-A that’s listed on it, but I got nothing. Does anyone know what the values of these components are supposed to be, or have the schematic?

Block Image

Thanks,

Alec

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

@alecm schematics for any of the iPods are not available. The only way to determine the value etc. for those components is by measuring them on another board.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

I was afraid of that. If anyone has a board that they're willing to measure those component's values on, I would be very grateful :)

tarafından

Yorum Ekle

Yanıtını ekle

Alec M sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 10

Her zaman: 91