Ana içeriğe geç

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

after updating to Catalina getting blue bands under windows.

Block Image

after upgrading a customers iMac from Mojave to Catalina there is this blue hue bar under any white window.

I dont think the upgrade had anything to do with it, its just thats all i have actually done with it since i have had it in our workshop.

Update (01/31/2020)

it looks like a panel fault. but find it strange its only become visible after an OSX upgrade.

the blue hue bar moves and follows the window , its not a static issue.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
2 Yorum

What is the exact model you are working on here is it a 21.5" or 27" and what year?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

This series uses LVDS signaling between the LCD panel and the logic board. Unlike iDP (eDP) signaling, LVDS is sensitive to signal disruption.

Does it look like the system was opened at some point?

It’s likely has a damaged cable or has some liquid damage on the connections where the signal is leaking to the ground lines via corrosion.

Bu yanıt yardımcı oldu mu?

Puan 1

4 Yorum:

its never been opened before.

after looking at it a bit more the blue hue will remain there if its left there long enough. almost like a type of screen burn.

tarafından

@chuxsta - What does it look like on an external monitor? Do you see the effect on it or just on the internal display?

tarafından

@danj

its fine on an external screen, so it leaves graphics and/or panel.

tarafından

@chuxsta - If the external is clean then that focuses back to the display and/or its connection to the logic board alone. Both internal & external displays leverage the same GPU services.

tarafından

Yorum Ekle

Yanıtını ekle

stuart sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 83